Neilsen CT2279, Оригинальное руководство пользователя

Страница: 4 / 12

3
high intensity noise is able to cause hearing loss.
i. Risk of Electric Shock. This Air Angle Die Grinder is not provided with an
insulated gripping surface. Contact with a ″live″ wire will also make exposed
metal parts of the tool ″live″ and shock the operator.
j. Avoid body contact with grounded surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
k. Explore the workpiece to avoid contact with hidden wiring. Thoroughly
investigate the workpiece for possible hidden wiring before performing work.
Contact with live wiring will shock the operator.
Tool use and care
a. Use clamps or another practical way to secure and support the workpiece
to a stable platform. Holding the work by hand or against the body is unstable
and is able to lead to loss of control.
b. Do not force the tool. Use the correct tool for the application. The correct Air
Angle Die Grinder will do the job better and safer at the rate for which the tool
is designed.
c. Do not use the tool if the switch does not turn the tool on or off. Any tool that
cannot be controlled with the switch is dangerous and must be repaired.
d. Disconnect the tool from the air source before making any adjustments,
changing accessories, or storing the tool. Such preventive safety measures
reduce the risk of starting the Air Angle Die Grinder unintentionally. Turn off
and detach the air supply, safely discharge any residual air pressure, and
release the throttle and/or turn the switch to its off position before leaving the
work area.
e. Store the Air Angle Die Grindere. when it is idle out of reach of children and
other untrained persons. A die grinder is dangerous in the hands of untrained
users.
f. Maintain the tool with care. A properly maintained tool is easier to control.
g. Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that affects the tool’s operation. If damaged, have the Air
Angle Die Grinder serviced before using. Many accidents are caused by
poorly maintained tools. There is a risk of bursting if the tool is damaged.
h. Use only accessories that are identified by the manufacturer for the specific
tool model. Use of an accessory not intended for use with the specific tool
model, increases the risk of injury to persons.
Service
a. Tool service must be performed only by qualified repair personnel.
b. When servicing the Air Angle Die Grinder, use only identical replacement
parts. Use only authorized parts.