ASSEMBLY
FIT HANDLE BARS TO THE TANK
1.
Fig
1
Lay the tank on a flat level surface
(such as a workbench or table
top), with the handlebar mounting
brackets facing up, as shown in
Fig
1
.
2.
Align the holes in the handlebar
with the handlebar
mounting
brackets of the tank.
3.
Place a washer onto each of the four handlebar mounting screws. Insert a
screw through each of the holes in handlebar and mounting brackets,
4.
Place a nut onto each of the screws and firmly tighten in place with a
wrench.
5.
Repeat steps 2-4 for the right handlebar.
ASSEMBLE THE FRAME
1.
Fig
2
Slide the axle through the axle
holes located at the bottom of the
handlebars, see Fig
2
.
2. Slide a washer onto each end of
the axle.
3.
Place a wheel onto each end of
the axle then slide a washer onto
the axle.
4.
Insert a split pin through the holes
in each end of the axle and bend
them so the wheels cannot slide
off the axle, see Fig
3
.
Fig
3
7
