Neilsen CT1085, Оригинальное руководство пользователя

Страница: 7 / 12

6
INITIAL TOOL SET UP
Read the entire Important Safety Information section at the beginning of
this manual including all text under subheadings therein before
set up or use of this product.
Note: For additional information regarding the parts listed in the following
pages, refer to the Assembly Diagram near the end of this manual.
Unpacking
When unpacking, make sure that the item is intact and undamaged.
This air tool may be shipped with a protective plug covering the air inlet.
Remove this plug before set up.
Air Supply
To prevent explosion: Use only clean, dry, regulated, compressed air
to power this tool. Do not use oxygen, carbon dioxide, combustible
gases, or any other bottled gas as a power source for this tool.
1. Incorporate an in-line oiler, shut-off valve, regulator with pressure gauge,