Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to jam and are easier to control.
Use the power tool, accessories and cutting tools, etc., in accordance
with these instructions and in the manner intended for the particular type
of power tool, taking into account the working conditions and the work
which needs to be done. Using a power tool in ways for which it was not
intended can lead to potentially hazardous situations.
4.5
Service
Your power tool should be serviced by a qualified specialist using only
standard spare parts. This will ensure that it meets the required safety
standards.
5. SPECIFIC SAFETY WARNINGS
The machine only in technically perfect condition in accordance with, safety
and danger, and use! Disturbances which may affect safety, must be rectified
immediately!
It is generally prohibited to modify safety equipment of the machine or to
make ineffective!
The biscuit jointer is intended solely for milling wood or similar materials.
For a different or additional use and resulting property damage or injury takes
CANNON TOOLS
no responsibility or warranty
6. ADJUSTMENTS
6.1
Adjusting the cutting depth
Move the motor base (14) as far as possible backwards.
Set the cutting depth by luring the cutting depth adjustment knob (6). The
knob is marked
“0”, “2”, “4”, “5”, “7”, “12” and “19” according to the sizes
of dowels.
Move the motor base forwards and check if the pin will fall in the notch of
the adjustment knob.
6.2
Adjusting the cutting angle
The cutting angle can be set by unlocking the clamping knob (7} and put
the angle stop (4) in the required angle.
