2
1. SAFETY
INSTRUCTIONS
SYMBOLS
In this manual and/or on the machine the following symbols are used:
•
Follow all workshop safety rules, regulations, and conditions when using wrench.
•
WARNING!
Disconnect from air supply before changing accessories or servicing.
•
Maintain the wrench in good condition and replace any damaged or worn parts.
Use genuine
parts only.
•
Non-authorised parts may be dangerous and will invalidate the warranty.
•
WARNING!
Check correct air pressure is maintained and not exceeded. We recommend
90psi.
•
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use
and ensure that all connections are secure.
•
Only use impact sockets which are specifically designed for use with an impact wrench.
•
Wear approved safety eye/face shield, ear defenders, and hand protection.
•
WARNING!
Due to the possible presence of asbestos dust from brake linings, when working
around vehicle brake systems we recommend you wear suitable respiratory protection.
•
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
•
Keep children and non essential persons away from the working area.
•
DO NOT
use the wrench for a task it is not designed to perform.
•
WARNING! DO NOT
use wrench if damaged or thought to be faulty.
•
DO NOT
use wrench unless you have been instructed in its use by a qualified person.
Denotes risk of personal injury, loss of life or damage to the tool in
case of non-observance of the instructions in this manual.
Wear hearing protection.
Wear safety goggles.
Contact with or inhalation of dust coming free during use (e.g.
lead-painted surfaces, wood and metal) can endanger your health
and the health of bystanders. Always wear appropriate protective
equipment, such as a dust mask. Always use proper dust
extraction during use.
Wear gloves.