• Never place the tool on the vehicle battery. There is a risk of a short circuit.
• Be careful when working with the engine running. Loose clothing, tools and
other objects can be caught by rotating parts and cause serious injury.
• Keep children and other unauthorized persons away from the work area.
• Do not allow children to play with the tool or its packaging.
• Be careful when working on hot engines because of the risk of burn injuries.
• If you remove the ignition key before repairing, you can prevent the engine from
being started accidentally and resulting in engine damage.
• This manual serves as a brief guide and does not replace a workshop manual.
Always refer to the vehicle-specific service literature, particularly the technical
data such as torque values and instructions for disassembly/assembly, etc.
• After repair or before starting the engine, turn a minimum of 2 turns by hand and
check the timing again.
• Turn the engine only in the normal direction of rotation (clockwise unless
otherwise specified).
• Do not use locking tools for camshaft and crankshaft as a counter-holder,
during loosening or tightening screws on pulleys, camshafts or crankshafts. This
can damage tools and engine components. Only use tools that are suitable for
this purpose.
INSTRUCTIONS FOR USE
Camshaft Setting Tool (1),
to be used as OEM T10414
•Align the camshaft slot by turning the
camshaft.
• Insert the tool and fix it with the screw.
Guide Pins (2),
to be used as OEM T10341
On compressor models, use the guide
pins instead of the mounting screws (A)
to guide the compressor up and down.
