STEP7. Fix Tilting Handle (Ref 17) by locating
the holes in the Tilting Handle Base Plate with
the three Brackets on the under side of the
Gear Box Mounting Frame (Refer to Diagram
below). Once Holes are alined secure by using
Metal Bolt (Ref 15) lock with Cottar Pin (Ref 16).
STEP8. Please note the 4 legs are marked either "A" or "B". Take legs marked "A" and Central
Pole (Ref 18). Using the two 4 5/8" Bolts with two Washers, Join the two Legs and Central Pole
(Refer to Diagram below). Then take the Legs marked "B" and join to Central Pole. The
washers are shaped to fit round the contour of the Frame. Secure before proceeding.
