Declaration of conformity
The A3 Thermal-Copier fi ts design, manufacturing and delivery conditions for the following
safety regulations of the EU-directives:
DIN EN 60950-1: Safety of Information Technology Equipment
•
DIN EN 55041-1/2: Electromagnetic compatibility - Requirements for household
•
appliances, electric tools and similar apparatus
DIN EN 50116: Information Technology Equipment - Routine electrical safety testing in
•
production
All PCB’s used inside the device are RoHS compliant
•
This device is made only for conventional use in studio’s and offi ces with regular
•
environment and temperatures. Children are not allowed to operate the device
Manufacturer:
KW Metalltechnik, GERMANY
Kronauer & Werner KG
Factory Service Agent - Australia & Asia:
For all warranty claims and machine repair contact:
NEHOC Service Department
E-mail: [email protected] (Internet: www.thermal.copier.com/service)
Service Dept. Phone: (02) 9997 9700
Sales, Supplies and Support
Please contact your place of purchase for all further support, product supplies (including
replacement carriers) and additional materials.
Disclaimer
This operation manual is produced by NEHOC Australia Pty Ltd for the A3 Thermal-Copier (TCA3-SP).
This manual may not be reproduced or edited without written permission from NEHOC Australia
Pty Ltd. This manual is intended to be used as a guide only, NEHOC Australia Pty Ltd may not be
held responsible for any fault or misinterpretation that may occur from its use by the customer.
Your Thermal-Copier has been designed and tested to meet strict safety requirements.
Attention to the following information will ensure the continued safe operation of the device.
Use only the power cord supplied with your machine.
Plug the AC power cord into a properly grounded electrical outlet. If you do not know
if an outlet is grounded ask a qualifi ed electrician to check the outlet fi rst.
Check the voltage of your machine, as listed on the label at the rear of the machine, meets
the voltage of your power supply.
If you use an extension cord make sure the cord is suited to the current of the machine.
Unplug extension cord for long periods when machine is not in use.
Warning
Avoid the potential of electrical shock by ensuring the machine is properly grounded
•
Do not place the machine in an area where people may step on the power cord
•
Do not place objects on the power cord
•
Electrical products may be hazardous if misused
•
Do not block the ventilation openings. The openings are intended to prevent overheating
•
Do not drop paper clips or staples into the machine
•
Warning
Do not push objects into slots or openings on the machine. Making contact with the
voltage point or shorting out a part could result in fi re or electrical shock.
If you notice noises that are not associated with the normal operation of the machine:
Turn off the machine immediately
1.
Turn off and disconnect the power cord from the electrical outlet
2.
Call an authorised service representative to correct the problem on (02) 9979 9700
3.
Warning
Never open the lid while the machine is in use as direct viewing of light from heat lamp
•
may damage eyes and cause damage to the machine.
Never open machine case without ensuring the machine is switched off and the power
•
cord is disconnected from the electrical outlet.
Note: Opening case (not lid) will void machine warranty.
2
© 2008 NEHOC Australia Pty Ltd
Safety Advice
