NEFF T59TS61N0/35, Руководство пользователя

Страница: 11 / 24

PowerMove
en
11
Caution
Do not place cookware in the middle between the right
and left zones. The cooking zones are not activated
correctly and you do not achieve a good cooking res-
ult.
8.2 FlexZone connect
By default, the flexible zone is configured as two separ-
ate cooking zones. Switch on the following function to
connect the cooking zones:
1.
Select one of the two cooking zones.
2.
Press ​⁠.
a ​⁠ lights up. The FlexZone is connected.
Note:
If you move or lift the cookware from an active
connected cooking zone, an automatic search starts.
Each item of cookware that is found within the cooking
zone during this search is heated at the previously se-
lected power level.
8.3 FlexZone disconnecting
▶
Touch ​⁠.
a
The cooking zones are separated and work inde-
pendently of each other.
9 PowerMove
You can use this function to change the power level of
an item of cookware by simply sliding it forwards or
backwards in the flexible cooking zone. The zone is di-
vided into three areas with different power levels.
9.1 Positioning and moving the cookware
Only use one item of cookware. The cooking area de-
pends on the cookware used, as well as its size and
positioning.
Each cooking area has a preset power level:
¡
Front area = power level ​⁠
¡
Middle area = power level ​⁠
¡
Rear area = power level ​⁠
You can change the standard setting of the preset
power levels. You can find out how to do this in the
"Basic settings" section →
Page 15 .
9.2 Activating PowerMove
Requirement:
Only place one item of cookware on a
flexible zone.
1.
Select one of the two cooking zones in the flexible
zone.
2.
Press ​⁠.
a
​⁠ and the power level for the area in which the con-
tainer is located light up.
a
The function is switched on.
Note:
You can change the power levels during cook-
ing.
9.3 Deactivating PowerMove
▶
Touching ​⁠
a
​⁠ goes out.
a
The function has been deactivated.