23
Once the time has elapsed
A warning beep sounds. In the time program function
display
¯¯
is shown, and the
6
indicator comes on. After
10 seconds the indicators turn off.
Pressing the
symbol turns off the indicators and stops the
beep.
Changing or cancelling the time
Press the
symbol several times until the
6
indicator
lights up. Change the time with the
+
or
-
symbols, or set to
¯¯
.
Cleaning lock function
Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning lock function.
Press the
symbol. A signal sounds. The control panel is
locked for 35 seconds. The surface of the control panel can
now be cleaned without risk of changing the settings.
Note:
The lock does not affect the main switch. The hob may
be switched off when desired.
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
¨
and
µ
flash alternately.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator
Function
³
Childproof lock
¯
Deactivated.*
³
Activated.
Sound signals
¯
Confirmation beep and error signal deactivated.
³
Only confirmation beep deactivated.
All signals activated.*
Automatic timer
¯
Switched off.*
³
-
ÉÉ
Automatic shut-off time
±
Duration of the time program function warning signal
³
10 seconds*.
30 seconds.
´
1 minute.
*Factory settings
