NEFF T29R8N0AU, Инструкция пользователя

Страница: 19 / 21

It is not always necessary to call the Service Centre. In
some cases, you may be able to solve the problem
yourself. This table contains some useful information.
Important:
Service
Trouble shooting
chart
systems work?
• Faulty fuse.
• Check the fuse in the
main fuse box and
• The automatic circuit breaker
or mains differential has been
triggered.
•Check to see if the circuit
breaker or a differential has
...If the electronic ignition •There may be food or cleaning
spark plugs and the burners.
...If the flame on the burners is
not evenly distributed?
•The burner components have
•The gas ports on the burners
are dirty.
•Clean the gas ports on the
...If the gas flow does not seem
normal or there is no gas flow
•The isolation valve is closed.
•If the gas is supplied from a • Open the isolation valve.
•Replace the gas bottle with
...If the kitchen smells of gas?
left open.
•Check to see if a valve has
•Check that the coupling on
the gas bottle is in order.
What´s wrong
Possible cause Solution
...If the safety cut-off devices
on the different burners do not
work?
•The control knob has not been
enough.
•The burner ports are dirty.
•Once ignited, keep the
control pressed in for a few
seconds.
•Clean the burner ports.
• Power turned
off.
• Turn power
on.
replace if fau
lty.
•Put the components in their
correct positions.
burners.
a full one.
been left open.
supply box.
light up when the hob is
connected for the first time?
•
Works correctly. The
displays must work for 30 min.
•
Wait 30 min. and it
automatically switches off.
•
Wait 30 min. and it
automatically switches off.
a power cut-off?
•
Works correctly. The
...If none of the electrical
..
If the displays light up after
...
If the residual heat displays
system does not work and
activated flickers?
• The burners are wet.
been triggered in the
mains
carefully.
•
The burner covers are not
product particles between the
positioned correctly.
•The gap between the spark
•
Make sure that the burner
plug and the burner needs to
covers are correctly
be cleaned carefully.
positioned.
displays must work for 30 min.
...
If there is a flame on the
the pilot of the burner
burner but the electronic
lighting continues to work?
•
The burner covers are not
positioned correctly.
•
Dry the burner covers
•
Make sure that the burner
covers are correctly
positioned
•
The burners may not be
not been assembled properly.
totally dry.
•
Dry the burners more
thoroughly (be particularly
careful with single-piece
burners).
Any of the following are considered to be abnormal operation and may require
gas bottle, it may be empty.
•Possible leak on the gas bo
ttle.
•One of the valves has been
Gas valves, which are dificult to turn in case the appliance fails to operate correctly,
kept pressed in for long
contact the authorised service provider in your area.
servicing:
Yellow tipping of the hob burner flame.
Sooting up of cooking utensils.
Burners not lighting properly.
Burners failing to remain alight.
Only authorised personnel from the
Service Centre are qualified to work on the main gas
and electric systems.
19