background image

en 

Safety

4

1.4 Safe installation

Follow these safety instructions when in-
stalling the appliance.

¡

Read the installation instructions carefully.
→ 

"Installation instructions", Page 6

¡

The images shown in these instructions are
for guidance only.

¡

The appliance can only be used safely if it
is correctly installed according to the safety
instructions. The installer is responsible for
ensuring that the appliance works perfectly
at its installation location.

WARNING ‒ Risk of explosion!

Escaping gas may cause an explosion.

All Installation, connection, regulating and
conversion work to a different gas type
must be carried out by an authorised pro-
fessional while taking into account the re-
spective applicable regulations and legal
requirements as well as the regulations re-
garding the local electricity and gas suppli-
ers. Special attention must be paid to the
provisions and guidelines that are applic-
able for the ventilation. For conversion work
to a different gas type, we recommend that
you call the after-sales service.

¡

Before any work is carried out on the appli-
ance, switch off the power supply and the
gas supply.

¡

Ensure that the kitchen is sufficiently ventil-
ated, in particular when operating the gas
cooking appliance.

¡

Do not connect the appliance to an exhaust
gas system for combustion products.

¡

This appliance is not suitable for use in a
marine craft, caravan or mobile home.

¡

The warranty applies only when using the
appliance as intended.

¡

Before installing the appliance, check that
the local conditions of the supplier are
compatible with the appliance settings spe-
cified on the rating plate (type of gas and
pressure, power, voltage).

¡

Secure the power cord to the cabinet to
prevent it from touching hot parts of the
oven or cooktop.

¡

Connect the appliance to the power supply
using the earth.

¡

Do not make any changes to the inside of
the appliance. If required, contact our tech-
nical customer service.

1.5 Safe use

WARNING ‒ Risk of explosion!

Escaping gas may cause an explosion. WHAT
TO DO IF YOU SMELL GAS OR IF THERE
ARE FAULTS IN THE GAS INSTALLATION

Do not try to light the appliance.

Immediately shut off the gas supply or
close the gas cylinder valve.

Immediately extinguish all naked flames
and cigarettes.

Do not operate any light switches or appli-
ance switches.

Do not pull any plugs out of any sockets.

Do not use any telephones or mobile
phones within the building.

Open windows and ventilate the room.

Call the after sales service or the gas sup-
plier.

If you cannot reach your gas supplier, call
the fire department.

Escaping gas may cause an explosion. Small
amounts of gas can collect over a longer
period of time and ignite.

Close the safety valve for the gas supply
when the appliance is out of use for pro-
longed periods.

Escaping gas may cause an explosion. If the
liquefied gas bottle is not upright, liquefied
propane/butane can enter the appliance. In-
tense darting flames may therefore escape
from the burners. Components may become
damaged and start to leak over time so that
gas escapes uncontrollably.

Always use liquefied gas bottles in an up-
right position.

Содержание T27DA69N0A/41





















Отзывы: