NEFF T2596 Скачать руководство пользователя страница 4

4

Dear customer

We thank you and congratulate you on your choice.
This carefully designed product, manufactured with the highest

quality materials, has been carefully tested to satisfy all your cooking

demands.
We therefore request that you read and follow these easy

instructions which will allow you to obtain excellent results right

from the start.
The cooktop is fitted with four boiling burners (one large, two me-

dium and one simmer burner) and a wok burner. All burners are

fitted with electronic spark ignition and flame failure device. The

wok burner is supplied with a supplementary wire pan support for

smaller pans. An additional wire pan support is supplied to fit

over the boiling burner pan supports to support small vessels such

as a coffee pot.
The cooktop’s data plate is accessible even with the cooktop fully

installed. It is positioned on the bottom of the unit. A duplicate

copy is supplied at the back of the instruction booklet. Always

quote the details from it to identify the appliance when ordering

spare parts or requesting a service.

In case of a malfunction, turn off the cooktop’s gas supply

before contacting the service centre for assistance.
Only an authorised person should connect and ser vice
this appliance.

Accessories.

Wok support trivet.

Coffee pot support.

Notes on disposal

Old appliances still have some residual value. An environ-

mentally friendly method of disposal will ensure that valuable

raw materials can be recovered and used again.
Before you dispose of your old appliance, make sure that it

has been rendered inoperable.

Your new cooker was protected by suitable packaging while it

was on its way to you. All materials used for this purpose are

environmentally friendly and suitable for recycling. Please make

a contribution to protecting the environment by disposing of

the packaging appropriately.

Gas supply

Check that the data plate shows the appliance is suitable for the

available gas supply.

21

Warning:

Disconnect power and
gas supply before

servicing the unit.

Introducing your cooktop

Service

Service and maintenance must only be carried out by an author-

ised person.
To replace parts such as injectors, gas control valves and ignition

switches, the ceramic hob, pan support, burner caps and burner

heads must be removed. The boiling burner heads are secured

with 2 fastening and the wok burner with 3 fastening screws.

To remove the hob:

1. Close isolation valve.
2. Remove the control knobs,  anti-spillage gaskets, pan supports,

burner caps and burner heads.

3. Using a flat bladed tool lift the

ceramic top and remove. Store

the ceramic top in a safe place.

To service gas control valves

Access to burner compartments is as per ’to remove the hob’. The

gas control valves are secured to the gas manifold by means of a

clamp fixed via two screws.
1. Remove the screws which secure the gas valve to the gas mani-

fold.

2. Replace the defective part.
3. Replace in reverse order and open isolation valve.

To replace the thermocouple

Access to burner compartments is as per ’to remove the hob’.
1. Remove the retaining ring securing the thermocouple.
2. Remove connection from electronic ignition module.
3. Replace defective part.
4. Replace in reverse order.

To replace the electronic ignition module

Access to burner compartments is as per ’to remove the hob’.
1. Remove the metal cover.
2. Disconnect the leads from the thermocouples.
3. Loosen the 2 securing screws.
4. Replace in reverse order.

To replace internal wiring and the gas control ignition

micro switch

Access to burner compartments is as per ’to remove the hob’.
1. Disconnect wiring between ignition module and gas control.
2. Disconnect microswitch from gas control.
3. Replace in reverse order.

Содержание T2596













Отзывы: