NEFF T..D90.., Инструкция по эксплуатации

Страница: 25 / 44

25
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. The
” , ‰ symbol and the residual
heat indicator œ / • flash alternately in the display.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
Displaying energy consumption
This function displays total energy consumption for the time the
hob has been switched on.
After switching off the hob, the consumption in kWh is
displayed for 10 seconds.
An example is shown in the image with a consumption of
‚ . ‹‰ kWh.
The Basic Settings chapter provides information on activating
this function.
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
N:K
Indicator Function
™‚
Childproof lock
‹
Deactivated.*
‚
Activated.
™ƒ
Audible signals
‹
Confirmation and error signals deactivated.
‚
Only error signal activated.
ƒ
Only confirmation signal activated.
„ All signals activated.*
™„
Display energy consumption
‹
Deactivated.*
‚
Activated.
™†
Automatic programming of cooking time.
‹ Switched off.*
‚
-
ŠŠ
Automatic shut-off time.
™‡ Duration of the time program function warning signal
‚ 10 seconds.
ƒ 30 seconds.
„
1 minute*.
*Factory settings