background image

en

12

12

Spray head for baking sheets *

* on applicable models
Please refer to the drawings enclosed in
the envelope
Large baking sheets or grids can be
cleaned with the aid of the special spray
head. Remove the top basket and attach
the spray head as shown in the drawing.
Arrange the baking sheets as illustrated,
so that the jet of water can reach all parts
of them (max. 4 baking sheets and
2 grids).

Knife rack *

* on applicable models

Shelf  *

*  not on all models
Lean tall glasses and those with long
stems against the shelf – not against other
items to be washed.

Long items, serving cutlery, salad servers
or knives should be placed on the shelf so
that they do not obstruct the rotation of the
spray arms. The shelf can be folded back
when not required for use.

Adjusting position of basket *

* not on all models

86cm

81cm

Ø max.
30/*25cm

Ø max.
20/*25cm

Ø max.
34/*29cm

Ø max.
20/*25cm

If required, the height of the top basket can
be adjusted in order to create more space
for large utensils either in the top or bottom
basket.
Select one of the two following procedures
according to the design of the top basket
for your appliance model:

Содержание S5443X2GB




























Отзывы: