NEFF S51E50X0GB/01 Скачать руководство пользователя страница 17

en

17

Terminating the programme
(Reset)

Open the door.
Press Start button 

9

 for

approx. 3 sec.
The Cleaning display 

7

 goes out.

Close the door. 
The remaining programme sequence
lasts approx. 1 more minute.
(Buzzer sounds).
Open the door.
Switch off ON/OFF switch 

1

.

Close the door.

Changing the programme

When the START button 

9

 has been

pressed, the programme cannot be
changed.
The only way a programme can be
changed is by Cancel programme (reset).

Intensive drying

The final rinse uses a higher temperature
which improves the drying result.
The running time may increase slightly.
(Caution if utensils are delicate!)

Open the door.
Switch on ON/OFF switch 

1

.

Hold down button > 

6

 and press

Start button 

9

 until the End display

8

 and salt refill indicator 

11

 flash.

Release buttons.
Keep pressing button > 

6

 until the

salt refill indicator 

11

 and “Check

water supply” 

12

 flash.

Release buttons.
The displays 

11

 and 

12

 flash.

Change the setting as follows:

Press button < 

5

 until the display

 is lit (Intensive drying on).

Press Start button 

9

.

The displays go out.
The setting is saved.
Close the door.

Maintenance and care

A regular inspection and maintenance of
your machine will help to prevent faults.
This saves time and prevents problems.

Overall condition
of the machine

Check spray arm for grease and
limescale deposits.

If you find such deposits:

Fill detergent dispenser with detergent.
Start the appliance without utensils in
the programme with the highest rinsing
temperature.

Clean the appliance with detergents/
appliance cleaners which are particularly
suitable for use with dishwashers.

Regularly clean door seal with a damp
cloth.

Never use a steam cleaner to clean your
dishwasher. The manufacturer is not liable
for any consequential damage.
Regularly wipe the front of the appliance
and fascia with a damp cloth; water and
a little washing up liquid are adequate.
Do not use sponges with a rough surface
or abrasive detergents, as these could
scratch the surfaces.
Stainless steel appliances: To prevent
corrosion, avoid using sponge cloths or
wash them out thoroughly several times
before using for the first time.

Warning

Never use other chlorinated household
detergents! Health hazard!

Salt and rinse-aid

Check the refill indicators 

11

 and 

10

.

If required, refill salt and/or rinse-aid.

Содержание S51E50X0GB/01





























Отзывы: