NEFF S517T80D6E, Инструкция по эксплуатации

Страница: 23 / 60

Rinse aid
en
23
Using detergents with salt
component
Detergent with a salt component
If combined detergents with a salt
component are used, special salt can
usually be omitted up to a water
hardness of 21° dH (37° fH,
26° Clarke, 3.7 mmol/l). If the water
hardness is over 21° dH, salt must be
used.
Switching off low salt
indicator / water softening
system
Switching off water softening system
If the use of combined detergents with
a salt component impairs the low salt
indicator
P
on the control panel or
the text on the display window at the
top
@
(enough salt for x rinse cycles),
the displays can be switched off.
Proceed as described under “Setting
water softening system” and set the
value to
0-8
. The water softening system
and salt refill indicator are now switched
off.
,
Rinse aid
Rinse aid
As soon as the low rinse-aid indicator
H
is lit on the control panel or is
requested on the front display *
):
,
rinse-aid should be topped up.
The rinse aid is required for stain-free
utensils and clear glasses. Use only
rinse aid for domestic dishwashers.
Combined detergents with rinse-aid
component may be used up to a water
hardness of 21° dH (37° fH, 26°
Clarke, 3.7 mmol/l) only. If the water
hardness is over 21° dH, rinse-aid must
be used.
* depending on the features of your
dishwasher
Top up the rinse-aid as follows:
1.
Open dispenser
92
; press lug on
the lid (1) and lift (2).