NEFF S517T80D6E, Инструкция по эксплуатации

Страница: 14 / 60

en
Getting to know your appliance
14
Settings
The dishwasher has been preset with
certain settings for your convenience.
However you can also change this
factory setting.
To change the setting:
1.
Open the door.
2.
Switch on ON/OFF switch
(
.
3.
Press Info button
{ 8
for 3
seconds until the following text is
indicated on the display window at
the top
@
Scroll with
< >
Set with
- +
Leave with Setup 3 sec.
.
4.
Keep pressing button
>
)R
until the
required setting is displayed.
Make the setting with setting buttons
+ -
`
.
5.
Press and hold the Info button
{
8
for 3 seconds.
The chosen setting has now been
stored.
You have the option of resetting all
changed settings back to the original
factory settings.
Note:
When you reset your dishwasher
to the factory settings, you are taken
directly to the settings for the initial
start-up.
Basic setting Factory setting Infotext;
by pressing Info button
{
Time setting 12:00 Set the current time.
Time format 24h 12h or 24h.
Time display Time Show end of programme with display
“Ready in” or “Finish at”.
Sprache/Language Deutsch Language selection.
Water hardness °E 16 - 20 medium Setting water hardness. When using
Multitabs, select the lowest setting.
Rinse aid dispenser Level 5 Amount of rinse aid affects drying. When
using Multitabs, select setting 0.
Sensor setting Standard Adjustment of soiling detection for
optimum cleaning result.
ExtraDry Off Improved drying for glasses and plastic
tableware.
Water connection * Cold water The dishwasher can be connected to
either hot (40-60°C) or cold water
(<40°C).
Eco forecast Off Show the water and energy consumption.
Auto Power Off After 1 min. Appliance automatically switches off at
end of rinsing process.
emotionLight * On Interior light.
Front display * On The front display can be selected.
* depending on the configuration of your specific dishwasher