NEFF S517P70Y0G, Инструкция по эксплуатации

Страница: 33 / 52

Operating the appliance
en
33
Switching off the appliance
Short time after the end of the
programme:
1.
Open the door.
2.
Switch off ON/OFF switch
(
.
3.
Turn off tap (does not apply to
appliances with Aqua-Stop).
4.
Remove the utensils when they have
cooled down.
Note:
When the programme ends,
leave the appliance to cool down a
while before opening it. This will prevent
steam from escaping and causing
long-term damage to your built-in
furniture.
Interrupting the programme
Caution!
Expansion (overpressure) may cause
the appliance door to jump open and/or
water to escape! If the door was opened
on an appliance which has a hot water
connection or is heated, always leave
the door ajar for several minutes and
then close.
1.
Open the door.
2.
Switch off ON/OFF switch
(
.
The LEDs go out. The programme
is saved.
3.
To continue the programme, switch
on the ON/OFF switch
(
again.
4.
Close the door.
Terminating the programme
(Reset)
Terminati ng the pr ogramme
1.
Open the door.
2.
Press the START button
)"
and
hold for 3 seconds
The display window at the top
@
and the front display *
):
show:
"Program was terminated".
3.
Close the door.
The programme sequence lasts
approx. 1 min. The display window
at the top
@
shows: “Finished”.
4.
Open the door.
5.
Switch off ON/OFF switch
(
.
6.
Close the door.
* depending on the features of your
dishwasher
Changing the programme
When the START button
)"
has been
pressed, the programme cannot be
changed. The only way a programme
can be changed is by Cancel
programme (Reset).