NEFF N90 B64CT73G0B, Руководство пользователя и инструкции по установке

Страница: 6 / 48

en
Familiarising yourself with your appliance
6
If the cooking time is relatively long, you can switch
the appliance off 10 minutes before the cooking time
ends.
¡
There will be enough residual heat to finish cooking
the dish.
Remove any accessories that are not being used from
the cooking compartment.
¡
Accessories that are not being used do not need to
be heated.
Allow frozen food to defrost before cooking.
¡
This saves the energy that would otherwise be re-
quired to defrost it.
Switch off the display in the basic settings.
→ "Basic settings", Page 18
¡
Energy is saved when the display is switched off.
Note:
The appliance requires:
¡
A maximum of 2 W in networked standby mode
¡
A maximum of 0.5 W in non-networked standby
mode with the display switched off
4 Familiarising yourself with your appliance
4.1 Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
On certain models, specific details such as colour and shape may differ from those pictured.
1
2 2
1
Display
→ "Display", Page 6
2
Buttons
→
"Buttons", Page 7
4.2 Display
You can configure all the functions on your appliance
via the display.
The main menu provides an overview of your appli-
ance's functions.
→ "Functions", Page 7
Navigating
Direction Use
Navigate to the left Swipe right on the display
with your finger
Navigate to the right Swipe left on the display
with your finger
Setting values
To adjust a setting, touch the appropriate place on the
display with your finger. The settings area appears on
the display. Swipe left or right over this settings area on
the display with your finger until the required setting is
magnified.