5
--------
Code
The manufacturer accepts no liability if these accessories are
not used or are used incorrectly.
Gas burners
There are indications to show which burner each control knob
operates.
It is essential to ensure that all the burner parts and pan
supports are correctly installed for the appliance to work
correctly. Do not swap the burner caps around.
Switching on a burner
Turn the desired burner control knob anticlockwise to the
required position.
If the burner does not switch on, wait at least a minute until
trying again.
Safety system
All the hotplates have a security device (thermocouple).
If the burner is switched off during operation (e.g. due to a
draught), the appliance automatically switches on the hotplate
again.
If relighting is not successful (for example, due to food remains
on the burner), the gas supply to this burner is turned off and a
warning sound is given. Turn the control knob to 0.
Switching off a burner
Turn the corresponding control knob clockwise to the 0 setting.
Automatic off
After six hours of operation, the appliance switches off
automatically. Turn all control knobs to setting 0; the appliance
can now be switched on again.
Power levels
The progressive control knobs can be used to control the
power needed, from minimum to maximum power.
Additional coffee maker
support
Only for use on the auxiliary
burner with pans which are no
more than 12 cm in diameter.
Simmer Plate
This accessory has been
designed to reduce the level
of heat at the lowest power
setting.
Place the accessory directly
on the pan support with the
cones facing upwards, never
directly over the burner. Cen-
tre the pan over the acces-
sory.
Z2471X0
Additional wok pan support: cast iron (4 kW)
Z2402X0
Additional coffee maker support
Z2480X0
Simmer Plate
Setting
Ú
Control knob off
High flame
›
Maximum capacity or aperture and elec-
tricity on
Low flame
œ
Minimum capacity or aperture
LJQLWLRQVSDUNHU
WKHUPRFRXSOH
