NEFF KI886 Series, Руководство пользователя

Страница: 20 / 40

en
Home Connect
20
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
1
)
and to the Home Connect app.
After switching on the appliance, wait
at least 2 minutes until internal
device initialisation is complete. Only
then should you set up Home Con-
nect.
¡
Connecting appliance to WLAN
home network (Wi-Fi) with WPS
function →
Page 20
¡
Connecting appliance to WLAN
home network (Wi-Fi) without WPS
function →
Page 21
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tips
¡
Please consult the documents sup-
plied by Home Connect.
¡
Please also follow the instructions
in the Home Connect app.
Notes
¡
Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→
"Safety", Page 4
¡
Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
10.1 Connecting the appli-
ance to a WLAN home
network (Wi-Fi) with
WPS function
If your router has a WPS function,
you can connect the appliance to
your WLAN home network (Wi-Fi)
automatically.
1.
Press .
a
The temperature display (refriger-
ator compartment) shows
.
2.
Press / (Refrigerator compart-
ment) repeatedly until the temper-
ature display (refrigerator compart-
ment) shows and the temperat-
ure display (freezer compartment)
shows .
3.
Press / (Freezer compartment).
a The temperature display (freezer
compartment) shows an animation
for two minutes. The appliance is
ready for automatic connection to
the WLAN home network (Wi-Fi).
4.
Activate the WPS function on the
router during this period.
To do this, take note of the inform-
ation in the documents for your
router.
a Once successfully connected,
flashes in the temperature dis-
play (freezer compartment).
5.
If the temperature indicator (freezer
compartment) shows , the appli-
ance was unable to establish a
connection to the WLAN home net-
work (Wi-Fi).
‒
Check whether the appliance is
located within the range of the
WLAN home network (Wi-Fi).
→
"Checking the signal
strength", Page 22
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.