NEFF I91VT44N0B, Инструкция по эксплуатации

Страница: 13 / 16

Trouble shooting
en
13
In the dishwasher:
Note:
Slight discolouration may occur if the metal
grease filters are cleaned in the dishwasher. This has
no effect on the performance of the metal grease filters.
■
Do not clean heavily soiled metal grease filters
together with cookware.
■
Place the metal grease filters in the dishwasher,
leaving plenty of space around them. The metal
grease filters must not be wedged in.
■
Place the metal grease filters in the dishwasher with
the opening facing down.
■
Wash the fan flaps and gas deflector by hand, and
not in the dishwasher.
Installing the metal mesh grease filter
Position the metal grease filter correctly and insert it.
Note:
Place the filter into the groove.
Replacing or regenerating the activated charcoal
filters
Activated charcoal filters trap the odour-causing
compounds in cooking smells. They are only used for
circulating-air mode.
Notes
■
The air recirculation module and activated charcoal
filters are not included with the appliance. The air
recirculation module and activated charcoal filters
are available from specialist retailers, from our after-
sales service or from our online shop.
■
Only use genuine replacement filters. This will
ensure that the appliance performs optimally.
■
Refer to the printed supplement for information
about the regenerability of the activated charcoal
filters and about replacing them.
Resetting the saturation displays
Once you have cleaned or replaced the relevant filters,
reset the saturation indicator so that the symbols go
out.
Press and hold the
A
button until
‰
flashes three times
on the display panel.The saturation indicators for the
metal grease filter and the activated charcoal filter have
now been reset.
3
Trouble shooting
Trouble s hooting
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
:
Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
Fault table
--------
Problem Possible cause Solution
The appliance
does not work
The plug is not
plugged into the
mains
Connect the appliance to the
power supply
Power cut Check whether other kitchen
appliances are working
The fuse is faulty Check in the fuse box to make
sure that the fuse for the
appliance is in working order
The button illumi-
nation does not
work.
The control unit is
faulty.
Call the after ­ sales service.
Appliance is mak-
ing noises
All the fan flaps
are closed
Open all the fan flaps
The grease filter/
activated char-
coal filter indica-
tor is lit.
The grease filter/
activated char-
coal filter is satu-
rated.
Clean the filter.
~
"Cleaning
and maintenance"
on page 10
Liquid in the appli-
ance
Liquid has found
its way into the
fan opening
Switch on the appliance and
leave it running at setting 1
for approx. 30 minutes.
Cleaning the inside of the
appliance
~
Page 12