NEFF I91VT44N0B, Инструкция по эксплуатации

Страница: 10 / 16

en
Cleaning and maintenance
10
Cooking with gas
:
Warning – Risk of fire!
Fatty deposits in the grease filter may catch fire. If the
appliance is to be operated next to a gas-fired
appliance, a gas deflector must always be fitted before
you begin cooking.
Note:
The gas deflector reduces deflection/disruption
of the gas flames from the burners on the cooktop and
prevents them from being blown out by draughts.
:
Warning – Risk of burns!
The appliance will become hot during operation.Allow it
to cool down before touching the fan flaps, gas
deflector and other components.
Note:
When the gas deflector is fitted, select intensive
mode or setting 3. This improves the extraction
performance of the worktop-mounted ventilation
system.
Note:
When using pans for cooking, use the
appropriate pan lid. If necessary, place the lid on the
pan at a slight angle, with the gap facing the worktop-
mounted ventilation system. This improves the
extraction behaviour of the table ventilation.
2
Cleaning and maintenance
Cleaning and maint enance
:
Warning – Risk of burns!
The appliance becomes hot during operation. Allow the
appliance to cool down before cleaning.
:
Warning – Risk of electric shock!
Penetrating moisture may result in an electric shock.
Clean the appliance using a damp cloth only. Before
cleaning, pull out the mains plug or switch off the circuit
breaker in the fuse box.
:
Warning – Risk of electric shock!
Do not use any high-pressure cleaners or steam
cleaners, which can result in an electric shock.
:
Warning – Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
Cleaning agents
To ensure that the different surfaces are not damaged
by using the wrong cleaning agent, observe the
information in the table. Do not use any of the following:
■
Harsh or abrasive cleaning agents,
■
Cleaning agents with a high alcohol content,
■
Hard scouring pads or cleaning sponges,
■
High-pressure cleaners or steam cleaners.
Wash new sponge cloths thoroughly before use.
Follow all instructions and warnings included with the
cleaning agents.
Area Cleaning agent
Stainless steel Hot soapy water:
Clean with a dish cloth and then dry with a
soft cloth.
Clean stainless steel surfaces in the grind
direction only.
Special stainless steel cleaning products are
available from our after-sales service or from
specialist retailers. Apply a very thin layer of
the cleaning product with a soft cloth.
Painted surfaces Hot soapy water:
Clean using a damp dish cloth and dry with a
soft cloth/towel.
Do not use any stainless steel cleaners.
Aluminium and plastic Glass cleaner:
Clean with a soft cloth.