NEFF C17UR02.0B, Руководство пользователя и инструкции по установке

Страница: 24 / 28

en
Installation instructions
24
17.10 Installing the appliance
ATTENTION!
Using a cordless screwdriver may damage the panels.
▶
Do not use a cordless screwdriver to secure the
panels.
1.
Push the appliance in fully.
Do not kink or trap the connection cable, or route it
over sharp edges.
2. Centre the appliance.
3.
Open the appliance door.
4. Unscrew the left- and right-hand panels.
5.
Screw the appliance tightly onto the unit.
6.
Refit the panels
7.
Refit the panels and screw them in place, first at the
top and then at the bottom.
8.
Remove any packaging material and adhesive film
from the cooking compartment and the door.
Note:
The gap between the worktop and the appliance must
not be closed by additional battens.
=
=
17.11 Removing the appliance
1.
Disconnect the appliance from the power supply.
2.
Open the appliance door.
3.
Unscrew the left- and right-hand panels.
4.
Undo the fastening screws.
5.
Lift the appliance slightly and pull it out completely.