NEFF B59CR3A 0 Series, Руководство пользователя и инструкции по установке

Страница: 22 / 44

en
Rails
22
2.
Pull the whole rail to the front and remove it.
3. Clean the rail.
→ "Cleaning products", Page 18
19.2 Attaching the rails
Notes
¡
The rails only fit on the right or left.
¡
For both rails, ensure that the curved rods are at the
front.
1. First, push the rail into the middle of the rear
socket until the rail rests against the cooking
compartment wall, and then push this back ⁠.
2.
Push the rail into the front socket until the rail
also rests against the cooking compartment wall,
and then press this downwards ⁠.
19.3 Removing the pull-out rail
WARNING ‒ Risk of burns!
The shelf supports get very hot
▶
Never touch the shelf supports when hot.
▶
Always allow the appliance to cool down.
▶
Keep children at a safe distance.
ATTENTION!
The self-cleaning surfaces in the cooking compartment
may be damaged by detaching and attaching the pull-
out rails.
▶
Detach the rails before detaching or attaching the
pull-out rails.
Notes
¡
Depending on the appliance type, you must change
the basic settings for the telescopic rails for appli-
ances with rails and pull-out rails.
→ "Basic settings", Page 15
¡
The pull-out rails can be installed at any level as re-
quired.
¡
If necessary, you can equip all levels with a pull-out
rail.
1.
Push on the side of the tab marked
PUSH
behind
the rail, and push the rail to the rear.
2.
Press and hold PUSH and swing the rail out-
wards until the front retainer is detached.
a
3. Pull the rail out towards the front.
4. Remove the pull-out rail.
5. Clean the pull-out rail.
→
"Cleaning products", Page 18