NEFF B4ACM5HH0B, Инструкция по эксплуатации

Страница: 18 / 40

en
Home Connect
18
:
Warning – Risk of fire!
Combustible objects that are left in the cooking
compartment may catch fire. Never store combustible
objects in the cooking compartment.
Manual remote start
You can operate and start your appliance remotely.
However, you must activate the remote start before
each operation.
Note:
If you open the appliance door 15 minutes after
remote start activation or the end of operation, remote
start is automatically deactivated.
Continuous remote start
You can always operate and start your appliance
remotely.
Activating remote start
Turn the function selector to
C
.
Home Connect settings
You can adjust Home Connect to suit your
requirements at any time.
Note:
You will find the Home Connect settings in your
appliance's basic settings. Which settings the display
shows will depend on whether Home Connect has been
set up and whether the appliance is connected to your
home network.
Remote diagnostics
Customer Service can use Remote Diagnostics to
access your appliance if you contact them, have your
appliance connected to the Home Connect server and if
Remote Diagnostics is available in the country in which
you are using the appliance.
Note:
For further information and details about the
availability of Remote Diagnostics in your country,
please visit the service/support section of your local
website: www.home-connect.com
About data protection
When your appliance is connected for the first time to a
WLAN network, which is connected to the Internet, your
appliance transmits the following categories of data to
the Home Connect server (initial registration):
■
Unique appliance identification (consisting of
appliance codes as well as the MAC address of the
installed WiFi communication module).
■
Security certificate of the WiFi communication
module (to ensure a secure IT connection).
■
The current software and hardware version of your
domestic appliance.
■
Status of any previous resetting to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use these Home Connect functions for the first time.
Note:
Ensure that the Home Connect functions can be
used only in conjunction with the Home Connect app.
Information on data protection can be accessed in the
Home Connect app.
Setting Selection/display
•’‹‚
Network connec-
tion
‹
= Not connected*
‚
= Connect automatically
ƒ
= Connect manually
„
= Connected*
•’‹ƒ
Pairing
(connecting to the
app)
‹
= Ready
‚
= Connect appliance
ƒ
= Appliance is connected*
•’‹„
Wi-Fi
‹
= Switch off
‚
= Switch on
If Wi-Fi has been activated, you can
use the Home Connect functions. In
networked standby mode, the appli-
ance requires max. 2 W.
* Display value (not adjustable)
** Factory setting
*** If a software update is available.
**** If the after-sales service has access.
•’‹…
Remote control
behaviour
‹
= Monitoring
You can display the operating sta-
tuses of your appliance in the Home
Connect app.
‚
= Manual remote start**
You can operate and start your
appliance remotely. However, you
must activate the remote start
before each operation.
ƒ
= Continuous remote start
You can always operate and start
your appliance remotely.
•’‹†
*** Software update
‚
= Update available*
ƒ
= Start an available update
•’‹‡
**** Allow remote diag-
nostics
‹
= No**
‚
= Yes
Setting Selection/display
* Display value (not adjustable)
** Factory setting
*** If a software update is available.
**** If the after-sales service has access.