en
Appliance door
36
1. Tip:
When fitting the door panes, make sure that
they are in the original order.
Insert the intermediate pane in the direction of the
arrow and push it in in the direction of the arrow un-
til it is fitted in the frame.
The arrow on the intermediate pane must line up
with the arrow on the frame .
2.
Push down lightly on the first intermediate pane
around , slide the retainer in at an angle and
push down until it clicks into place.
a
The retainer has been inserted.
3. ATTENTION!
The light transmission is lower due to the glass rod
being held.
▶
Do not touch the glass rod with your bare hands.
▶
Clean the glass rod with glass cleaner before in-
serting it.
Select the left-hand reflector and insert it at the
top.
4.
Insert the reflector and click it into place in the
gap .
5.
Insert the second reflector in the same way as the
first.
6.
Use glass cleaner to remove any finger marks from
the reflectors if necessary.
7.
Centre the inner pane on the appliance door.
8.
Insert the inner pane into the door cover at an angle
towards the back .
9.
Insert the retaining bracket for the inner pane into
the opening .
