NEFF B27CR22N1B, Руководство пользователя и инструкции по установке

Страница: 10 / 36

en
Before using for the first time
10
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Initial use
When the appliance is connected to the power supply
for the first time or following a lengthy power failure, the
settings that you will need to configure before you can
use it will appear.
Note:
You can change these settings at any time by
going to the basic settings.
→
"Basic settings", Page 14
Setting the language
1.
Connect the appliance to the power supply.
a The first setting will appear after a few seconds.
2.
Use the button to navigate to the bottom row.
3. Use the or button to select the language.
4.
Use the button to navigate back to the top row.
5. Use the button to select the next setting.
Setting the time
1.
Use the button to navigate to the next row.
2.
Use the or button to select the current time.
3.
Use the button to navigate back to the top row.
4.
Use the button to select the next setting.
Setting the date
1.
Use the button to navigate to the next row.
2.
Use the or button to select the correct day.
3.
Use the button to navigate back to the top row.
4.
Use the button to select the next setting.
5.
Use the button to navigate to the next row.
6.
Use the or button to select the correct month.
7.
Use the button to navigate back to the top row.
8.
Use the button to select the next setting.
9.
Use the button to navigate to the next row.
10.
Use the or button to select the correct year.
11.
Use the button to navigate back to the top row.
12. Open and close the appliance door once.
a
The appliance will perform a self-test, after which it
will be ready to use.
a
Initial configuration is now complete.
6.2 Cleaning the appliance
Before using the appliance to cook food for the first
time, you must clean the cooking compartment and ac-
cessories.
1.
Remove the product information, accessories and
any leftover packaging (e.g. polystyrene pellets)
from the cooking compartment.
2.
Wipe the smooth surfaces in the cooking compart-
ment with a soft, damp cloth.
3.
Press to switch the appliance on.
→
"Switching on the appliance", Page 10
4.
Set the required heating function and temperature
for the heat-up process and press to start.
→
"Setting the type of heating and temperature",
Page 10
Heating up
Heating function CircoTherm hot air
Temperature Maximum
Cooking time 1 hour
5.
Keep the kitchen ventilated while the appliance is
heating.
6.
Press to switch off the appliance after 1 hour.
→
"Switching off the appliance", Page 10
7. Allow the appliance to cool down.
8.
Clean the smooth surfaces with soapy water and a
dish cloth.
9.
Thoroughly clean any accessories you used with
soapy water and a dish cloth.
7 Basic operation
7.1 Switching on the appliance
▶
Press to switch the appliance on.
Notes
¡
In the basic settings, you can specify whether the
heating functions or the main menu should appear
when you switch on the appliance.
→
"Basic settings", Page 14
¡
If you do not perform any actions on the appliance
for an extended period, it will automatically switch it-
self off.
7.2 Switching off the appliance
▶
Press to switch the appliance off.
Notes
¡
The residual heat indicator will appear on the dis-
play while the cooking compartment is still hot.
→
"Residual heat indicator", Page 10
¡
The cooling fan will continue to run until the cooking
compartment has cooled down.
→
"Cooling fan", Page 8
7.3 Residual heat indicator
After you have switched off the appliance, the residual
heat indicator will appear on the display.
Display Meaning
-H- Residual heat high (over 120 °C)
-h- Residual heat low (between 60 and
120 °C)
7.4 Setting the type of heating and
temperature
1.
Press to switch the appliance on.
a
The heating functions will then be displayed.