NEFF B1DCC0A 0B Series, Инструкция по эксплуатации

Страница: 16 / 32

en
Rails
16
p
Rails
Rails
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to remove the
shelves and clean them.
Detaching and refitting the rails
:
Warning – Risk of burns!
The rails become very hot. Never touch the hot rails.
Always allow the appliance to cool down. Keep children
away from the appliance.
Detaching the rails
1.
Lift the rail slightly at the front
‚
and detach it
ƒ
(fig.
!
).
2.
Then pull the whole rail to the front and remove it
(fig.
"
).
Clean the rails with cleaning agent and a sponge. For
stubborn dirt deposits, use a brush.
Attaching the rails
The rails only fit on the right or the left side. For both
rails, ensure that the curved rods are at the front.
1.
First, insert the rail in the middle of the rear socket
‚
,
until the rail rests against the cooking compartment
wall, and push it back
ƒ
(figure
!
).
2.
Then insert the rail into the front socket
„
, until the
rail also rests against the cooking compartment wall
here, and press it downwards
…
(figure
"
).
q
Appliance door
Appliance door
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to clean the
appliance door.
Removing and installing the door panels
To facilitate cleaning, you can remove the glass panels
from the appliance door.
Locking the appliance door
1.
Open the appliance door fully.
2.
Open the two locking levers on the left and right
(fig.
!
).
3.
Close the appliance door as far as it goes (fig.
"
).
Removing panels
1.
Press the left- and right-hand sides of the cover
(fig.
!
).
2.
Remove the cover (fig.
"
).
3.
Lift out each panel (fig.
#
) and set them down
carefully on a flat surface.
4.
If necessary, you can remove the condensate trough
for cleaning. To do this, open the appliance door
fully (fig.
$
).
2 1
D
E
2
F
G
1
D
E
2 1
2 1