Doc#: 313-0001-002 REV 0
7 of 11
Customizing the Touch Panel
Display
The display backlight of the Touch Panel will turn off after a period without user activity.
When off, the display backlight will turn on immediately by tapping the display or by using the
proximity sensor feature; see below.
The Touch Panel supports automatic brightness adjustment using the built-in ambient light
sensor.
In the display menu the following settings are available:
Automatic brightness
When enabled, the built-in ambient light sensor will adjust the brightness of the screen depending
on the current lighting conditions in the room
Display brightness
You can set a fixed brightness in "Display brightness". Be aware that this is only available if
Automatic brightness is disabled.
Blank screen after timeout (Enabled by default)
When enabled, the display backlight will turn off after timeout set in "Blank timeout".
NOTE: It is strongly recommended to keep this function enabled. If this feature is disabled the
backlight will turn off after 120 minutes to increase the lifetime of display backlight.
Blank timeout
The number of minutes before the Display backlight turns off. (default: 10 minutes).
The blank timeout can be set between 1 to 120 minutes.
Dimming duration
This is the amount of seconds it takes for the display to go from dim to blank mode (Default: 10
seconds)