nedis SCLU112BU, Быстрый старт, Страница: 7 / 76

7
Using the product (image B )
1. Press and hold power and Z/T button A 3 for 1
second to switch on the product.
2. When the display A 1 shows 0.00, press
measurement unit button A 4 to select
measurement unit.
3. Pass the belt A 5 through the luggage handle.
4. Secure the hook A 6 around the triangular ring
A 2 .
5. Hold the product horizontally over the luggage.
6. Press power and Z/T button
A 3 to zero or tare
any weight that should not be included in the total
weight of luggage. The display
A 1 shows the
letter T and resets to 0.00.
7. Lift the product and luggage gently off the floor.
8. Wait for the weight reading to stop and stabilise.
The display A 1 shows the letter H, flashes the
measured weight 3 times and then locks.
9. The display A 1 shows the measured weight for 2
minutes, then automatically switches off.
4
When the product is unable to read the weight of
the luggage, press power and Z/T button
A 3 to
reset the display to 0.00 and try again.
10. Press and hold power and Z/T button A 3 for 3
seconds to switch off the product manually.
4
Do not keep the product around sharp edged
objects while in storage to avoid pressure on
buttons that causes unnecessary battery drainage.
Troubleshooting
Display
warning
messages
Possible cause Possible
solution
Lo Low battery Replace old
battery with
new battery.