Nederman L-PAK Series Скачать руководство пользователя страница 11

L-PAK 150/250 Advanced

5.3.1 Alarm! Fan Hi-Temp

When the fan temperature passes above 125°C, a Warning Fan Hi-Temp message is displayed, and the filter
cleaning valve opens to let air in to cool the fan.

If the filter-cleaning valve has been open to cool the fan for more than 8 minutes, and the temperature has not
gone below 90°C. The unit shuts off and the message Alarm Fan Hi-Temp is displayed. Correct the problem, and
press ‘OK’ to reset the warning.

ESC

OK

          Alarm!

        Fan Hi Temp
        Vacuum Unit 
                Off
          Th 11:23
Reset OK  

à

Th: The actual day and time when L-Pak was stopped.

5.3.2 Alarm! Motor Protector Activated

The motor is overheated. Correct the problem, and press ‘OK’ to reset the warning.

ESC

OK

           Alarm!

   

  Motor

Protector 

Ac!vated

            Th 11:23

Reset OK  

à

Th: The actual day and time when L-Pak was stopped.

5.3.3 Alarm! Low-Pressure CAS

This alarm is only shown when the Compressed Air Switch (CAS) is installed.

The compressed air level is low. When the accurate pressure is established, No reset is required after the active
alarm message.

ESC

OK

Alarm!

Compressed Air

Low Pressure

CAS<3Bar

Th 11:23

Th: The actual day and time when L-PAK was stopped.

11

Содержание L-PAK Series




















Отзывы: