Nederman HD82, Инструкция по эксплуатации, Страница: 18 / 22

HD82 EN
18 QMM001(02)
Table 10-1: Spare parts specification - see Figure 4.
Pos. Article No. Description Qty Unit
1* 76374723 Vibration absorber 4 Pc
2 76376656 Lock handle 4 Pc
3 Front door 1 Pc
4 Inlet chute 1 Pc
5 76376599 Labyrinth seal 1 Pc
6*
6* 76374724
76375235 Screen 0,5mm
Screen 0,7mm 1
1 Pc
Pc
7 76374729 Basket 1 Pc
8* 76374728 Drum 1 Pc
9 73001324 Sleeve for drum 1 Pc
10 73001325 Shaft plate 1 Pc
11 76376586 Radial seal (front) 1 Pc
12* 76374731 Bearing (front) 1 Pc
13 Door 1 Pc
14 76374732 Shaft 1 Pc
15* 76374733 Bearing (rear) 1 Pc
16 76376612 Bearing cover (rear) 1 Pc
17 Belt protection (inner) 1 Pc
18 Belt protection (outer) 1 Pc
19
19 V-belt sheave
Bushing Ø48 mm 1
1 Pc
Pc
20* 76374725 V-belt 3 Pc
21 76376587 Radial seal (rear) 1 Pc
22 Housing 1 Pc
23a Outlet chute - chips 1 Pc
23b Outlet chute - liquid 1 Pc
24 76374734 Motor 1 Pc
25
25 V-belt sheave
Bushing Ø42 mm 1
1 Pc
Pc
26 73000534 Rotation sensor 1 Pc
27 73000243 Bushing bearing (front) 1 Pc
28 73000535 Bushing bearing (rear) 1 Pc
29 76376602 Bearing cover (front) 1 Pc
30 76374726 Rubber - chips outlet 1 Pc
31 76374727 Rubber - liquid outlet 1 Pc
* Wear parts that should be kept in stock
11 Recycling
The product has been designed for component materials to be recycled.
Its different material types must be handled according to relevant local
regulations. Contact the distributor or Nederman if uncertainties arise when
scrapping the product at the end of its service life.