Nederman HD82, Инструкция по эксплуатации, Страница: 14 / 22

HD82 EN
14 QMM001(02)
Despite the fact that the parts are individually balanced a certain imbalance
may arise when material is fed in. To avoid vibrations being transferred to
mountings the centrifuge is installed on vibration absorbers.
The screen opening is delivered as a standard 0.7 mm if not otherwise specified
in the order. Other screen openings may be fitted.
5.2 Technical data
Table 5-1: Technical data
Model Capacity*
(kg/h)
Motor Weight (kg) Noise level
dB(A)***
Space
requirements
(mm)
Part No.
HD82 2000 11 kW - 3ph 1400 78,5 1100 x 1900 76362841**
For main dimensions of the unit see Figure 3.
* Capacity depends on volume / weight of material, size and shape of the swarf
**Including:
- unit stand
- shaft rotation inductive sensor (w/o controls)
- wearing parts made of SS / Hardox
- motor supply 3~400V 50Hz
***
Measurement based on EN ISO 11201.
6 Main components
We continuously improve our products and their efficiency through the
introduction of design modifications. We reserve the right to do this without
introducing these improvements on previously supplied products. We also
reserve the right, without previous notice, to modify data and equipment, as
well as operating and maintenance instructions.
Table 6-1: Unit main components are shown on Figure 1.
Pos. Name
1 Wet chip inlet hopper
2 Access door
3 Self-cleaning wedge bar screen
4 Dry chip discharge outlet
5 Accelerator vanes
6 Separator drum
7 Liquid discharge outlet
6.1 Accessories
The screen opening is delivered as a standard 0.7 mm if not otherwise specified
in the order. Other screen openings may be fitted.
The accessories for HD82:
• Support stand.
• Inductive sensor for shaft monitoring (without control).
• Wear Parts Stainless Steel / Hardox.