Nederman HD100, Инструкция по эксплуатации

Страница: 11 / 18

HD100
11 QMM033(02)
EN
5.2 Technical data
The main technical characteristics of HD100 are presented in Table 5-1
Table 5-1: HD100 Swarf Centrifuge characteristics
Model Capacity
[kg/h]
Motor Height
[mm]
Weight
[kG]
Space
requirements [mm]
HD100 max. 5000 18 kW -3 ph 3000 3600 1650 × 2330
NOTE:
Flow rate dependent on nature of coolant, contaminate and media
grade.
6 Main components
We continuously improve our products and their efficiency through the
introduction of design modifications. We reserve the right to do this without
introducing these improvements on previously supplied products. We also
reserve the right, without previous notice, to modify data and equipment, as
well as operating and maintenance instructions.
Centrifuge HD100 consists of the following main components (see Fig. 1).
Table 6-1: Main components of Swarf Centrifuge HD100
Item N° Component name
1 Inlet - wet chips
2 Access door
3 Self cleaning wedge bar screen
4 Outlet - dry chips
5 Separator bowl
6 Accelerator zone
7 Outlet - liquid
6.1 Accessories
The screen opening is delivered as a standard 0.7 mm if not otherwise specified
in the order. Other screen openings may be fitted.
The centrifuge is equipped with variable speeds, soft start and brake. The rate
of rotation is adjusted with a potentiometer in the electrical cabinet.
7 Before installation
7.1 Delivery checks
Check the unit for any transport damage. In case of damage or parts missing,
notify the carrier and your local Nederman representative immediately.
7.2 Installation requirements
Consideration must be taken to the positioning of the centrifuge in relation
to other equipment. The centrifuge requires very little space. However, space
for maintenance must be available and adequate space must be ensured for