Nederman FlexPAK Скачать руководство пользователя страница 16

Страница: 16 / 55

FlexPAK

3.2 Warning messages

If a warning is activated, a problem needs to be corrected, but the unit continues to work. If a warning message

is displayed in the PLC display, the light in the Standby/Running button flashes one second on, one second off.

This 1/1 on/off sequence continues until the problem is corrected. The backlight colour in the display changes

from white to amber while there is an active warning.
There are two exceptions to this rule,

Section 3.2.1 Time For service

and

Section 3.2.4 Bag Replacement Switch

Activated

3.2.1 Time For service

The time interval set in the ‘Service Interval Setting’ menu has expired. If this warning is activated, the light in

the Standby/Running button is lit one second and then again in 7 seconds. This 1/7 on/off sequence continues

until the warning is reset.
Reset the alarm by first putting the unit into Off mode. Restart the unit. In Standby mode, press the manual fil-

ter cleaning button for 10 seconds.

ESC

FlexPak

Hi Vacuum Unit

Time for

Service

Th 15:01

Reset OK

GEN

S TOP

3.2.2 Warning! Main Filter Clogged

This Warning is only shown when the Main Filter Delta Pressure Switch (MFDPS) is installed. This message is dis-

played if the Differential Pressure switch “DP switch” is installed and the Dp switch detects a high differential

pressure across the filter.
When the Dp switch detects a high Dp pressure, it activates a timer, which is shown in the display. If the Dp pres-

sure is still high when the timer elapses, the vacuum unit will stop and the alarm message “Alarm! Main Filter

Clogged” is activated.

ESC

Warning!

Main Filter Clogged

Th 11:23

Time to Unit

Stop 08:00 m

Reset OK

Time to Unit Stop: Displays the time until the unit is stopped.

3.2.3 Dustbin Full

The Bin Level Indicator has detected that the dust bin has been full for 12 minutes. Empty the dust bin and press

the OK button to reset the warning.

ESC

Warning!

D u s t b i n F u l l

Th 15:01

Time To Unit

Stop 05:00 m

Reset OK

Time to Unit Stop: Displays the time until the unit is stopped.

Содержание FlexPAK
























































Результаты поиска

Содержание FlexPAK

Отзывы:

Похожие инструкции для FlexPAK

Бренды по названию

Популярные бренды

Nederman FlexPAK, Руководство по настройке

Результаты поиска

Содержание FlexPAK

Отзывы:

Похожие инструкции для FlexPAK

Бренды по названию

Популярные бренды