BOOSTERS
© Nedap IDEAS, P.O. Box 103, NL-7140 AC GROENLO
Page 12 of 16
3.4 TESTING THE CONFIGURATION
The ISO14443-A / Mifare settings can be tested before loading it into the Smartcard-Booster or
Transition-Booster by using the Philips Pegoda reader.
From the ‘Pegoda’ menu choose ‘Test configuration (only ISO14443A)’.
Place the Mifare transponder on the Philips Pegoda reader and click the ‘Read’ button. This transponder
would normally be read by the Booster.
Configuration Test
If the card is not read or if the wrong data is shown under DRIVER-ID then check if the configuration
settings are correct. Remember that only Mifare cards can be tested this way.
3.5 CONFIGURATION
FILES
Your configuration can be saved into a so-called Smartcard Booster Config File (*.sbcf). These files
contain all the configuration settings as you have defined them. Saved Config Files can be easily opened
from within the File menu.