Nedap ANPR LUMO Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 39

Nedap ANPR LUMO Скачать руководство пользователя страница 37

ANPR LUMO

| installation guide

37/39

CHANGE SYSTEM PASSWORD

Changing the system password. We recommend to change the system password.

Important note:

Make sure you store this password in a secure place. The system password cannot
be recovered. In case you lose the system password, the camera must to be
returned to Nedap.

CHANGE LANGUAGE

Select user interface language.

UPDATE SOFTWARE

Update ANPR system software.

SETUP SERIAL *

Setup RS485 serial parameters.

Select to use BASIC or OSDP communication protocol.
Select the baud rate.

When using OSDP communication, you may also select the OSDP device address
and the OSDP secure channel base key (OSDP-SCBK). The OSDP key must be
exactly 16 bytes, e.g. 303132333435363738393a3b3c3d3e3f.

* requires at least ANPR LUMO hardware revision A.05 and software v4.5.1.

FACTORY RESET

This option is used to reset the camera configuration back to factory settings.

All custom configuration data will be lost!

8.4.2

LIBRARY VERSION

In this menu you can see the current versions of all software parts of the camera, this information can be used for
support reasons.

8.4.3

DIGITAL IO

In the menu you can see the current status of all inputs and outputs.
With the buttons “ACTIVATE” you can activate the Relay outputs. With these buttons it will be possible to test the
outputs.

«
...
35
36
37
38
39
»

Содержание ANPR LUMO








































Отзывы:

Нет отзывов