NED XCM6040SAT4, Руководство пользователя

Страница: 26 / 73

NED
XCM6040SAT4 UME-xxxx-00
26
26
4.1.5 Memory Setup Values (Factory Settings)
The memory setup values (factory settings) are shown below.
Table 4-1-5-1 Memory Setup Values (Factory Settings)
Control Item
CMD VAL1 VAL2
Control Description
Analog Gain gax 0 x1(0dB)
Digital Gain gdx 0 x1
Digital Offset odx 0
0DN
(8bit)
Exposure Mode inm 0 Free Run
Programmable
Exposure Time
int 0 61
36.6µs
(Dividing=16
、 Counter=61)
Output Signal Setting 1 voa 0 0 8bit6144pixel
Output Signal Setting 2 voc 0 linear
Test Pattern tpn 0 OFF
Pixel Correction Setting shc 1 600
Factory White Correction
Correction Level 900DN(10bit)
Exposure-Readout
Time
pad 0 0µs
Scanning Direction rev 0 Forward : 0
4.2 Details on Commands
4.2.1 Setting Analog Gain
Sets analog gain in 21 steps between x1 and x11.2. (See Table 4-9)
Format 2 CMD VAL1 CR
CMD gax
VAL 0 (x1) –20 (x11.2)
<Example>
gax 5 CR (Setting analog gain 5(x1.84))
>OK
>gax 5
4.2.2 Setting Digital Gain
Sets digital gain in 512 steps between x1 and x2.