NED
UME-0021-03 SU2020/SU2025
47
8.5.3 Open the control setting file
1) Click on tool-bar button
“A”.
2) Select the appropriate setting file (*.ini file) and click on the "Open" button.
3) The setting is loaded, and each control parameter is initialized.
Note:
If the parameters displayed are gray, this indicates that the camera does not
support the function.
NCCtrl memorizes automatically the setting file name that was last opened.
This file is automatically opened when NCCtrl is booted up.
8.5.4 Selecting interface and Timeout setting
8.5.4.1 Selecting interface
1) Click tool-bar button F.
2) Select the desired interface in the Drop-down-list-box.
3) Using the
“Detailed setting” button, you can change the interface setting.
4) Click on
the “OK” button to complete this operation. Click on the “Cancel” button to cancel
this operation.
