P2125EN00
01 - 2008
TECHnICIAn MEnu
16
2.1.4 - MASTER SLAVE
2.1.4.1 - SET UP
2.1.4
m
aster
/ s
lave
The machine control system is pre-arranged for the connection in a
bank of vending machines (Astro, Oblò, Sfera and Rondò).
2.1.4.1
s
ettIngs
This function is used for setting the hierarchies of master/slave rela
-
tionships between connected vending machines.
This machine can be configured a “Master”, i.e. having control over
the second machine, or as “Slave”, i.e. leaving the control to the
other machine.
2-digit (XX) or 3-digit (0XX; 9XX) selection numbers will also be set.
The master/slave function is not enabled by default.
2.1.4.2 - SLAVE PRiCE HOLD
2.1.4.2
s
lave
P
rIce
h
oldIng
(eXe.
Protocol
)
In the event an Executive payment system in “Price Holding” mode
is set, this function is used for setting the same mode also in the
software of the slave machine.
2.1.4.3 - COMb’D SELECT.S
2.1.4.3
c
ombIned
selectIons
(eXe. / bdv
Protocol
)
In the case of combined or virtual selections, this function is used
for setting whether to keep (OFF) or not (ON) the partial amount,
should the second selection/dispensing fail.
2.1.4.4 - SfERA TYPE
2.1.4.4
s
fera
tyPe
In the event of 2 or more Sfera / Rondò vending machines connect
-
ed in a bank, with this function it is possible to define the Master/
slave hierarchic order between the vending machines of the same
type assigning to each a label (sfera 2; sfera 3; etc.)
2.1.5 - fREE VEND bONUS
2.1.5
f
ree
vend
bonus
This function, compatibly with the national laws, permits the dis-
pensing of a free product every certain number of sold selections.
In any case the free selection is random within the programmed
number.
The machine emits an intermittent sound signal and the display
indicates a congratulations message.
2.1.5.1 - ENAb. VEND bONUS
2.1.5.2 - bONUS RATE
2.1.5.1
e
nablIng
f
ree
vend
bonus
This function is used for enabling/disabling the free dispensing of a
product.
2.1.5.2
b
onus
frequency
With this function it is possible to program the
number of selections within which 1 free product
is dispensed. The free dispensing is random within
the programmed number.
Содержание Rondo
Страница 1: ...PROGRAMMING MANUAL Code Date P2125EN00 English 01 2008 Rondò ...
Страница 2: ......