NW Global Vending – TECHNICAL MANUAL
This document was produced by MARK AC for the exclusive use of the technical personnel in the after-sales service.
. No part of this document may be divulged to a third party or reproduced partially or entirely without the prior permission of NW GLOBAL VENDING
. All rights reserved.
New dispenser “KORO”
07/10/2005
page 31 / 42
In According to new market requirements, it was necessary to design new solutions using quick fastening
without any screws, to allow easy access for maintenance, as well as quick changes to the layout by means of
preassembled modules.
23 – DOSER DEVICES AND POWDER PRODUCT
CONTAINERS
Standards components are used, already adopted in
other applications, but in a new support and with
newly designed specific powder containers,
comprising also the mixer assembly.
The system is modular and of the same width as a
powder container.
It was designed for quick and easy removal as
required by the particular type of machine.
I
NSTANT PRODUCT CONTAINER OPEN AND
BEING REMOVED
M
IXER RATIOMOTOR ASSEMBLY
VIEWED FROM BELOW
M
IXER RATIOMOTOR ASSEMBLY
BEING REMOVED FROM ITS SEAT
R
ATIOMOTOR REMOVED FROM ITS SEAT
I
NSTANT PRODUCT CONTAINER OPEN
AND BEING REMOVED
