Necta Kobalto, Руководство по программированию

Страница: 50 / 50

P285U00 05 - 2007
TECHNICIAN MENU
4
6
gSm
The control software can send, via GSM modem, a signal indicat-
ing a machine failure or an “ending product” “pre-alarm”, after
dispensing a certain (programmable) number of selections of a
given product.
6.1
gSm p
In code
This function is used for programming the identification code that
will be sent to the GSM modem (optional) when switching the
machine on.
6.2
gSm
pre
-
alarmS
6.2.1
p
re
-
alarmS threSholdS
This function is used for defining the number of pieces or grams of
powder for a given product, after which a “running-out” “pre-alarm”
is signalled via modem.
6.2.2
r
eSettIng the pre
-
alarm counterS
With this function the counters that control the pre-alarms are
reset.
6.3
b
ank number
The number in the bank of machines (1 to 7) that identifies the
machines that have the “slave GSM” function, therefore sending
data via the “master” machine modem .
The number 0 identifies the machine that is connected directly to
the modem, i.e. the “master GSM”.
6 - GSM
6.1 - GSM PIN CODE
6.2 - GSM PRE-AlARMS
6.2.1 - SET GSM THRESH.
6.2.2 - RES PRE-AlM CNT.
6.3 - GROUP NUMBER