Necta Kobalto, Руководство по программированию

Страница: 21 / 50

P285U00 05 - 2007
TECHNICIAN MENU
17
Not accepted coins
This function programs the rejection of coins when in “exact
amount” mode.
Check the label on the coin mechanism for the correct coin to
value matching, indicating the position of the coins.
Dispensing buttons
This function enables or not the buttons on the coin mechanism
used to release the coins in the change return tubes.
Value of “exact amount”
This value defines the combination of empty coin tubes, setting the
coin mechanism in “exact amount” mode. The possible combina-
tions of empty coin tubes are indicated below.
For greater simplicity, the combination is described with reference
to tubes A, B and C, where tube A receives the lower value coins
and tube C the greater value coins.
0 = A or (B and C)
1 = A and B and C
2 = A and B only
3 = A and (B or C)
4 = A only
5 = A or B only (default)
6 = A or B or C
7 = A or B only
8 = A or C only
9 = B and C only
10 = B only
11 = B or C only
12 = C only
C.P.C. device
It dialogues with the coin mechanism if devices are installed or
removed from the serial interface (C.P.C.-type devices - the moni-
toring unit is always enabled by default).
Minimum level of tubes
It brings forward the “Insert exact amount” message for the user,
by adding a number of coins between 0 and 15 to the programmed
number of coins, to set the “full change tubes” status.
Free Vend VMC
Most payment systems with the BDV protocol control the free vend
function.
However, there are some payment systems without such function.
In this case, if free selections are to be dispensed, free vending
must be enabled with VMC (vending machine control, enabled by
default) and the price of the selections must be set to zero.
MDB
The MDB protocol menus are used for defining the following
functions:
Type of vending
Setting the operating mode for multiple or single dispensing. With
multiple dispensing, the change is not automatically returned after
a successful selection; however the credit is available for further
selections. When pressing the coin return button (if the function
is enabled), the available credit is returned up to the maximum
change value.
Change control
To enable/disable the operation of the coin return button.
MDB