C
OMPLETE CLEANING
1
2
Disassembling and cleaning the mixer:
• Detach the tube (
D
) from the mixer.
• Rotate the instant product conveyor (
A
) upwards.
• Rotate the lever (
C
) counterclockwise.
• Remove the mixer unit (
B
).
Disassembling and cleaning the mixer:
• Separate all components: product funnel (
A
), powder deposit
drawer (
B
), water funnel (
C
).
3
4
Disassembling and cleaning the mixer:
• Unscrew the mixer impeller and use a finger to lock the cogged
disk on the mixer shaft.
• Wash, rinse all disassembled parts carefully.
• Reassemble the impeller.
Assembling the mixer:
• Reassemble all components of the mixer (
B
) and carefully engage
the water funnel properly.
• Rotate the lever (
C
) clockwise to fasten the mixer to the machine.
• Rotate the instant product conveyor (
A
) downwards.
• Reconnect the tube (
D
) with the mixer.
5
6
Cleaning the spouts:
• Unscrew the knurl from the spout support (
A
).
• Remove the spout support (
C
) from the machine.
• Detach the tube (
B
) from the flow divider (
E
).
• Separate the milker spout (
D
) from the flow divider (
E
).
• Separate the upper part (
F
) from the flow divider (
E
).
Cleaning the spouts:
• Separate the instant drink spouts from the corresponding tubes.
• Wash all components and carefully remove all visible residues and
films mechanically.
• Carefully rinse the spouts and carefully reconnect the tubes with the
corresponding spouts.
• Reassemble the two pieces of the flow divider.
If the machine is complete with steam and/or hot water dispens-
ing nozzles, use a detergent solution to remove any residue from
the nozzles.
KOBALTO ESPRESSO
A
B
C
D
A
B
C
D
A
B
C
A
B
D
E
C
F