C
LEANING MILKER SPOUT
1
2
• Unscrew the knurl (
A
) intended to fasten the spout support.
• Remove the spout support (
B
).
• Detach the tubes from the milker spout.
• Separate the milker spout (
A
) from the flow divider (
B
).
• Separate the flow divider from the spout support.
3
4
• Rotate and pull part (
A
) at the same time.
• Rotate and pull part (
B
) at the same time.
• Separate part (
C
) and part (
D
).
• Wash all parts by means of a detergent solution. Carefully remove
any visible residue and film mechanically, i.e. by using - if neces-
sary - brushes.
• Rinse and dry the parts carefully.
5
6
• Reassemble part (
C
) and part (
D
).
• Replace part (
B
) and rotate to fasten it.
• Replace part (
A
) and rotate to fasten it.
• Replace the flow divider (
A
).
• Re-connect the tubes with the unions of the milker spout properly.
• Insert the milker spout (
B
) onto the flow divider.
• Replace the spout support by fastening it by means of a knurl.
CAPPUCCINATORE
A
B
C
D
A
B
A
B
D
ISASSEMBLE THE MILKER SPOUT
REGULARLY FOR CLEANING
.
N
EVER USE DETERGENTS THAT
ARE TOO SCENTED
.
A
B
C
D
A
B