Necta Vending Solutions SpA StarFood, Инструкция по установке, эксплуатации и обслуживанию

Страница: 19 / 68

15
© by NECTA VENDING SOLUTIONS SpA 0401 171 - 02
DISPLAYING DRUMS / SLIDERS
Slider failure
If the motor electrical absorption is absent or above the
programmed threshold, power is disconnected from the
motor and the selection is disabled.
Slider open
If the microswitch does not return to normal position within
3 attempts of 10 seconds after opening the slider, the
machine is set out of service.
10 more closing attempts are made at 60 second intervals.
Drum failure
If the “home” point magnet is not detected after a complete
drum rotation, or if a microswitch does not detect the
passage of the partition after making a selection, the
selection is disabled.
RESET
By confirming this function all current failures will be reset
EXTERNAL LIGHTING
Setting whether or not the lighting lamps in the external
panels are to be switched on when the machine is out of
service or during the “Energy saving” time band.
PROGRAMMING THE PARAMETERS
CASH
This set of functions controls all parameters regarding the
payment systems and the sales prices.
SELECTION PRICES
Four different prices can be set for each selection, and for
each day of the week, programmed according to the time
bands, if enabled.
For each of the 4 time bands prices (0 to 65,535) can be
programmed globally (same price for all selections) or for
the single selections.
Should the majority of products be sold at the same price,
it will be convenient to set the price globally and then
change the figure of the selections with different prices.
TIME BANDS
Four programmable time bands are provided for selling
products at different prices.
The time periods are programmable for beginning and end
time by hours (00 to 23) and minutes (00 to 59).
If the values for start and end of the time band are set to
00.00 the time period is disabled.
The reference time is kept by an internal clock, program-
mable as:
day/month/year weekday 1-7
and then
hour/minutes/seconds.
COIN MECHANISMS
It is possible to decide which of the payment system
protocols available are to be enabled for the functions.
The available payment systems are:
- Executive
- Validators
- BDV
- MDB
By selecting one of the systems it is possible to control its
functions.
EXECUTIVE
The following payments systems are available for the
Executive system:
- Standard
- Price Holding
- Coges
- U-Key
VALIDATORS
When the “Validat. Lines” (line setting) function of the
“technician” menu is displayed, the value of the 6 validator
coin lines, A to F, can be changed.
BDV
The BDV protocol menus are used for defining the follow-
ing functions:
Type of vending
Setting the operating mode for multiple or single dispens-
ing. With multiple dispensing, the change is not automati-
cally returned after a successful selection, however the
credit is available for further selections. When pressing the
coin return button, the available credit is returned if its value
is lower than the maximum change value.
Change control
This function enables/disables the return of credit if no
selections are made.
If enabled, this function allows the return of coins even if the
first selection was not dispensed.
If however a selection fails for any reason, the change will
be returned if requested.
Maximum credit
This function is used to define the maximum accepted
credit.
Maximum change
It is possible to set a limit to the total amount of change
returned by the coin mechanism when pressing the coin
return button or after a single dispensing serving.
Any credit exceeding the amount programmed with this
function will be cashed.
Accepted coins
It is possible to define which, among the coins recognised
by the validator, are to be accepted.
Check the label on the coin mechanism for the correct coin
to value matching, indicating the position of the coins.