background image

 

- 4 -

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

UK ONLY       IMPORTANT        PLEASE READ CAREFULLY 

 
 

2. How to change the power plug 
 

WARNING

 

 
 
 
 
 
 
 
 

 

The wires in this mains lead are coloured in accordance with the following code: 

BLUE-NEUTRAL   BROWN-LIVE ( OR ACTIVE )  

As the colours of the mains lead of this appliance may not correspond with the coloured 
markings identifying the terminals in your plug - PROCEED AS FOLLOWS: 
The earth plug pin in unnecessary. As the machine is designed under double insulation 
structure, the earth wire is removed from the machine. The wire coloured BROWN must be 
connected to the terminal marked L or A or coloured RED. The wire coloured BLUE must be 
connected to the terminal marked N or coloured BLACK. Neither core is to be connected to 
the earth terminal of a three-pin plug. 

 

Do not operate on an unstable surface such as a sofa or a bed.

If the sewing machine falls down, it could cause an injury or damages to the 
machine. 

Do not repair, disassemble or modify except what is mentioned in the 
instruction manual. 

Doing so could cause an electric shock, a fire or an injury. 

Do not drop or insert any foreign objects into any openings such as 
opening space when you remove the face cover and / or the outer casing 
space of bobbin case. 

Doing so could cause an injury or damages to the machine. 

When you change the power plug or cord, do not repair, disassemble or 
modify except at the authorised dealeror service centre. 

Doing so could cause an electric shock or a fire. 
 

If for any reason the power plug for this product is removed it should be 
immediately disposed of safety and not stored anywhere where it could 
be inadvertently used again. 

Doing so could cause an electric shock or a fire. 

Содержание Vigorelli S1







































Отзывы: