NEC WT615 Series, Руководство по установке

Страница: 26 / 40

4. Setting the LAN Setting of Projector
24
<2> Use the button, move the highlight to a character, and press
the button.
<3> Repeat step <2> above to input the encryption key.
The character will be input.
•
Each button on the software keyboard has the following function.
•
" " " "•••••••••••• Move the character insertion position in the encryption key field
to the left or the right.
•
"MODE" ••••••••••••• Selects uppercase, lowercase, or special characters.
•
"SP" •••••••••••••••••• Inputs space.
•
"BS" •••••••••••••••••• Deletes one character to the left of the character insertion posi-
tion in the encryption key field.
•
[OK] •••••••••••••••••• Finalizes the input character and closes the software keyboard.
•
[Cancel] ••••••••••••• Cancels the input character and closes the software keyboard.
•
"HEX" or "ASCII" •• Selects alphanumeric character input or hexadecimal number
input.
•
When "HEX" is displayed, alphanumeric characters (ASCII)
can be input.
•
To input hexadecimal numbers, move the highlight to "HEX"
and press the
button. "ASCII" will be displayed
instead of "HEX", and hexadecimal numbers can be input.
•
When hexadecimal numbers can be input, "0x" is automati-
cally displayed at the beginning of the input field.
Finalize "Advanced".
<1> Use the button to highlight [OK] and press the button.
The "Profile" page will be displayed again.
Reconnect the network.
<1> Use the button to highlight "Reconnect" and press the
button.
Finalize the setting.
<1> Use the button to highlight [OK] and press the button.
The contents of the setting will be stored in the memory of the projector.
13 12
14 13
14
nw̲guide̲j̲0808.book 24 ページ ２００７年３月１４日 水曜日 午後５時３７分